Set as Homepage | Tour | Bookmark

TFC Development Co., Ltd. TFC 零四部品開發有限公司

Pulley | Clutch | Clutch Cover | CNC Accessories | Fuel S...

Today is 30,Nov,2020
QR code
You are now at: Home » Products » VESPA 150 Rear Drive Set
VESPA 150 Rear Drive Set
VESPA 150 Rear Drive SetVESPA 150 Rear Drive SetVESPA 150 Rear Drive Set
VESPA 150 Rear Drive Set Enlarge image
Products: Hits: 23VESPA 150 Rear Drive Set 
Price: Negotiable
Min. Order: N/A
Total Quantity: N/A
Delivery: 30 days after payment
Valid until: Never Expire
Updated: 2020-08-11 16:45
  Send Inquiry
Lightweight clutch cover
1. The appearance of the clutch cover adopts CNC cutting throughout, which minimizes the body tolerance and enhances the appearance and texture.
2. Teflon coating is used. Teflon coating is a unique high-performance coating with high heat resistance and can be continuously used in environments above 260°C. The maximum service temperature is 290-300°C.
3.Third, the friction surface using sandblast drilling design, the clutch quickly run-in, quickly reach 100% joint area, and the use of drilling holes to discharge dust, to achieve the performance of no jitter and skidding.
Composite metal clutch
1. The friction plate is made of soft non-asbestos and copper powder.
2. The clutch retains a strong coefficient of friction and does not cause abnormal noise and excessive wear.
3.Third, the small spring is to use 2.2MM wire diameter to improve the joint speed, to achieve the best combination of brisk and non-jitter start time.